Login to write a review
The RS2010 is a high specification body protector which meets level 3 of the newest revised European and Beta Standard. Designed to meet the requirements of the most demanding rider it is unique in its construction, the independently hinged foam sections maximise comfort and freedom of movement. A major new feature is the physical restraint on the side adjusters to prevent unprotected areas becoming present.
The RACESAFE RS2010 has evolved from the RS2000 Body Protector to meet the requirements of the revised European and BETA standard EN13158:2009, level 3, the highest level. It is a high specification Body Protector, designed to meet the needs of the most demanding rider.
The RACESAFE RS2010 retains it’s Independently hinged foam sections for a close fit, and uses a laminate of some of the most effective, comfortable foams available.
One of the major new features incorporated into the RACESAFE RS2010 is a physical restraint on the side adjusters, this prevents over adjustment and the possibility of unprotected areas becoming present.
A Made to Measure service is available, and optional Shoulder Pads RACESAFE RS200 SHOULDER PADS WITH MEDICAL CARD HOLDER
Available from stock Navy & Bottle Green.Available to order in (delivery is apprx 4/6 weeks) Black, Royal, Red and Maroon, plain or two colour.
If you wish to order your own colours click on customise this product.Other colours are available in both the RS2010 and the optional Shoulder Pads at additional cost. Please enquire.
Over Shoulder cms
Std Back Length cms
64 – 70
62 – 67
66 - 74
70 – 76
67 – 72
75 – 83
76 – 83.5
72 – 77
Ex Large Long
76.5 – 83.5
69.5 – 74.5
84 – 93
80 – 88
73 – 80
83.5 – 91.5
77 – 84
91.5 – 101
84 – 91
81.5 – 88.5
94 – 104
100 – 110
91 – 100
110 – 120
101 – 110
Also available to special order in Short back length
with 2.5cm shorter back in the Child sizes and 4cm shorter back in Adult
sizes. (Same prices as the Standard back sizes).
A made to
measure service is also available. Please enquire.
Use the size chart to find the correct size. If the measurements are at the top or bottom of a size range, try to find the two closest sizes to establish which is more comfortable.Points to check on fittingThe body protector should be tried on over light clothing. Check that is comfortable to wear in all simulated riding positions. The garment should fit securely and reasonably tightly to avoid movement during activity and to ensure that it is in place in the event of an accident.
Put on the selected body protector. Adjust it to a snug fit. Use the shoulder closures to make fine adjustments to the fit around the shoulders. Do up the second flap of the shoulder closure. Pull the waist flaps of the back panel forward and press them onto the Velcro of the front panel. Tighten one then the other to get a tight fit. Adjust the length of the waist strap and do it up. Ensure that all hook fastening at each closure is in contact with loop material. Check the overall fit is snug, and that no RED VELCRO is exposed. If it is the protector is too small. Try the next larger size.
Women may find the use of a larger size of front panel than back panel enables a more comfortable fit to be achieved