During clipping, apply Liveryman Clipper Oil at the start and after every 10 minutes of use.

Periodically apply Liveryman Blade Wash to remove excess grease and cut-hair.

Blades should be removed from the clipper after use, cleaned and oiled before storage.

Clippers are both expensive and, if not correctly maintained, could be potentially dangerous. Sound maintenance is essential for safety and good clipping.
If the clipper is used on a regular basis i.e. (on a large yard, or by a contract clipper) then the clipper should be serviced once a year, although all clippers should be checked yearly for electrical safety. Clippers should be sent to a reputable company to be serviced, checked for safety or to have the blades sharpened

Often, whilst clipping, people over-tension the Liveryman clippers, causing excessive heat and wear on the motor. Liveryman clippers have an overload switch that cuts out if the motor is overloaded by excess tensioning or blade blockage. Should this occur simply press the button at the rear of the clipper after removing any obstruction. The clipper should now operate. The Maverick has a preset tension system requiring no adjustment.

Clippers and blades should be stored in a clean, dry and secure environment. The Clippers should be cleaned of hair and grease, and the blades should be cleaned with Liveryman Blade Wash, wiped dry, then oiled and stored in the Liveryman blade box.