Thickness Guide
Single & Regular 4cm = 610gms/sq.m
Plus One & Extra 7cm = 915gms/sq.m
Doubler 10cm = 1220gms/sq.m

Polypad fitting instructions
1) Place saddle over the Polypad on the horses back, hold polypad at each end of the saddle and pull firmly upwards into the gullet of the saddle to create airflow along the spine.

2) Lift the saddle flap away from the horse on each side, making sure the horses coat is laying flat and check that the front edge of the Polypad is sufficiently foward (10-12cm in front of the girth) so the shoulder movement does not pull the Polypad downwards and backwards.

3) Do the girth up tight enough at this point to ensure the pad cannot move before finally tightening to mount.

4) Filament - The stripe filament is designed to go against the saddle, with the polycotton against the horse.

Washing instructions
1) It is preferable to wash Polypads before they are first used.
2) Machine wash at maximum temperature of 40.C or cold wash.
3) Always reshape the fibre filling after washing whislt the Polypads are wet by holding the edges of the pad and shaking vigorously, checking that the Polypad fibres under the polycotton feel flat to the hand.
4) Leave to dry overnight or tumble dry on cool or low temperature.