Reiver 010 is Airowear's tabard body protector with separate waist and shoulder fastenings to adjust the fit. Sizes are available in children's and adults sizes and can be teamed with a pair of matching shoulder protectors.
Exceeds the requirements for EN13158:2009 and is certified to BETA2009 Level 3.
* New improved fit with shorter back lengths.
* 33 standard sizes. See chart. Made to measure also available, £35 surcharge.
* 3 back lengths , short, reg, long, in each size to achieve a "fit for all". Extra long also available by
* Easy to fit with waist and shoulder adjustment.
* Removable cover for washing.
clipping, apply Liveryman Clipper Oil at the start and after every 10 minutes
apply Liveryman Blade Wash to remove excess grease and cut-hair.
should be removed from the clipper after use, cleaned and oiled before storage.
are both expensive and, if not correctly maintained, could be potentially
dangerous. Sound maintenance is essential for safety and good clipping.
If the clipper is used on a regular basis i.e. (on a large yard, or by a
contract clipper) then the clipper should be serviced once a year, although all
clippers should be checked yearly for electrical safety. Clippers should be
sent to a reputable company to be serviced, checked for safety or to have the
the Liveryman Clipper:
whilst clipping, people over-tension the Liveryman clippers, causing excessive
heat and wear on the motor. Liveryman clippers have an overload switch that
cuts out if the motor is overloaded by excess tensioning or blade blockage.
Should this occur simply press the button at the rear of the clipper after
removing any obstruction. The clipper should now operate. The Maverick has a
preset tension system requiring no adjustment.
Clippers and blades should be stored in a clean, dry and secure environment. The clippers should be cleaned of hair and grease, and the blades should be cleaned with blade wash, wiped dry and then oiled and stored in a blade box.